Kian Airbag Jeans

PROTECTION / SAFETY PERFORMANCE
Out of the box, the Kian Airbag Jeans provide a combined system of impact safety and abrasion resistance when used with the included airbag and impact protectors:

• Integrated Mo’cycle® Airbag Module – CE-certified to PAC-002:12/2024 and EN 17092-4:2020 (Class A) when used as part of the approved garment system.
• AAA-rated Armalith® motorcycle denim – single-layer blue denim engineered for certified abrasion performance in the main zones (CE EN 17092-2:2020).
• KNOX Micro-Lock impact protectors:
• 2 × knee/shin impact protectors – CE EN 1621-1:2012, K/L Type B, Level 2.
• 2 × hip impact protectors – CE EN 1621-1:2012, H Type A, Level 1.

The jeans come with a built-in airbag zipper channel along the inner waist to house the Mo’cycle® Airbag. When the module is installed and the tether is correctly attached to the bike, clipping in arms the system.

If you separate from the motorcycle with sufficient force in a crash scenario, the tether pulls the mechanical trigger, activating the CO₂ cartridge. The airbag inflates in milliseconds and forms a pressurized cushion of air around your lower back, hips, thighs and tailbone, working together with the knee/shin and hip impact protectors. Impact energy is then managed by both the airbag and the armor rather than being transmitted directly to the body.

HOW THE MO’CYCLE® AIRBAG SYSTEM WORKS
The Mo’cycle® airbag is a fully mechanical safety system with no batteries, electronics, subscriptions or charging. It only needs three things from you: clip in, ride, and reload after a deployment.

CLIP IN BEFORE YOU RIDE
Each Mo’cycle® airbag garment (jeans, pants, shorts, vest or jacket) has a built-in trigger point. A dedicated tether connects that trigger to your motorcycle:

• One end of the tether stays permanently mounted to the bike.
• The other end of the tether clips to your Mo’cycle® airbag garment.

Clipping in becomes the same habit as fastening your helmet.

CRASH DETECTION – MECHANICAL “DEAD MAN’S SWITCH”
If you separate from the bike in a crash, the tether gets a strong, sudden pull. When the force is high enough (crash-level, not just a small tug), the mechanical trigger releases and activates the CO₂ cartridge inside the airbag module.

There is no GPS, gyro, app or subscription involved – just a robust mechanical “dead man’s switch” designed for real-world use.

INFLATION IN A FRACTION OF A SECOND
Once triggered, the cartridge empties into the airbag:

• Inflation time is under 0.15 seconds.
• Pressurized air bladder forms a firm, pressurized cushion around key impact zones.

Coverage depends on the garment you are wearing, for example:

• Jeans / pants / shorts – hips, thighs, tailbone and lumbar area.
• Vest / jacket – chest, ribs, back, spine and neck support (the Liam Vest helps stabilize the neck so the spine is better supported during an impact).

The airbag works together with traditional impact protectors (knee, shin, hip and similar) so impact energy is managed through a combination of air and armor, instead of being transmitted directly into bone.

AFTER A DEPLOYMENT – RELOAD AND RIDE AGAIN
The Mo’cycle® airbag module is reusable, provided it remains structurally intact after a crash:

1. Inspect the garment and airbag – check that nothing is broken, torn or heavily abraded.
2. Replace the spent CO₂ cartridge – use a new cartridge of the correct size (60 cc / 100 cc, depending on model).
3. Re-arm the trigger – follow the instructions for your model.
4. Clip back in and you are ready for the next ride.

The airbag itself is designed to withstand real-world use; the CO₂ cartridge is the consumable part. If you have been in a high-speed crash, replace the complete airbag system. If the crash was minor and low-speed with no visible damage to the airbag, cartridge area, fabric or stitching, carefully inspect it – and when in doubt, treat it as a high-speed crash and replace the full airbag system anyway.

TECH & SPECS – MO’CYCLE® AIRBAG MODULE IBV1
A reusable, mechanically triggered airbag engineered for blink-fast, lab-verified impact safety performance. When you clip in, the system is always armed – no batteries, no charging. Upon a crash-level tug, the module inflates in under 0.15 seconds, reaching approximately 0.2 bar at around 150 ms, then stabilizing at a protective working range (protocol reference around 250 mbar) with a steady hold of at least 5 seconds. Internal lab tests show a smooth, controlled pressure curve with a peak around 0.47 bar (size-dependent), and no harsh overshoot. Integrated impact protectors (such as hip and knee) work with the airbag to spread energy and shield the bladder from sharp points, creating a double-layer safety system for real-world crashes.

Key KPIs
• Inflation time: < 0.15 s (activation to working pressure).
• Pressure at ~150 ms: approx. 0.2 bar (fast pressure rise).
• Peak internal pressure: around 0.47 bar (size L, internal lab reference).
• Hold time: ≥ 5 s at working pressure.
• Air volume: ~17 L (size L reference).
• CO₂ cartridge: 60 cc (easy reload).
• Trigger type: mechanical (no batteries).

TESTED AND VERIFIED
• Airbag protocol: PAC-002 (12/2024) – activation force within 30–250 N, multidirectional triggering, over-inflation tested at 2× working pressure (≤ 1 bar) without burst, and tether strength > 776 N.
• Garment standard: EN 17092-4:2020 (Class A) trousers (outer shell that houses the module).

Values are lab-measured, not estimates. Performance varies with size, temperature, fit and cartridge condition. Always safety-check the airbag after any deployment.

IMPORTANT SAFETY NOTE
No airbag or impact system can guarantee that you will be injury-free in every crash. The Mo’cycle® airbag system is designed to improve safety and to help reduce the risk and severity of certain injuries when used correctly, but it is not a license to ride beyond your limits. Always ride within your skills, the conditions and local laws.

ONE AIRBAG – TO RULE THEM ALL
MULTIPLE JEANS & PANTS
The included Mo’cycle® Airbag Module is fully compatible across a range of Mo’cycle® Airbag Jeans and Pants – including Melvin, Kian, Patrick, Ava, Emma, Touran and the Adventure Pants & Shorts.
• One airbag module
• Multiple garments for different rides and seasons
• Same familiar safety system wherever you go

This lets you build a small Mo’cycle system wardrobe: swap the module between your favorite jeans and adventure pants while keeping the same trigger feel and inflation performance.

PRE-ORDER FOR 2026 COLLECTION
Mo’cycle is a pre-order brand. The only way to buy from us is by pre-order during an open order window.

When you pre-order, you get the same pricing level retailers buy at. That means the price you see is not a “discount”, it’s our pre-order / retailer-buy-price. Once the window closes, that price is gone.

The pre-order trade-off: You’re ordering early, like a retailer does. That’s why you get pre-order pricing. Our prices aren’t “discounted”, this is the retailer buy price you get by pre-ordering. You get the opportunity to buy at retailer pricing, like a retailer would.

Read full Pre-Order & Delivery info here 

DELIVERY
Production starts about two weeks after the pre-order deadline ends. Your estimated delivery date is shown in the link above.

Don’t miss the deadline, we don’t mass-produce and we don’t make extra units.

We start production from the very beginning: spinning thread, preparing materials, and building the fabric that combines cotton with UHMWPE (ultra-high-molecular-weight polyethylene) fibers for extreme abrasion performance. Then comes the airbag manufacturing, assembly, testing and CE-related processes.

This is a multi-step build. We are not Amazon.

If you need immediate delivery, wait and buy at full price through a retailer (if they stock your size and model). If you pre-order, you’re joining the full journey, including the realities of creating and producing new safety technology.

SHIPPING EU & USA - No customs fees for customers in the EU and USA.
Free shipping on all orders over $1.000 for EU & USA.

INTERNATIONAL CUSTOMERS (outside EU & USA) – Shipping & import duties/ local taxes may apply depending on your country.

WHAT’S INCLUDED

• 1 × Kian Airbag Jeans – AAA-rated Armalith® denim, men’s fit.
• 1 × Mo’cycle® Airbag Module IBV1 – lower-body airbag module
(installed).
• 1 × CO₂ cartridge – correct size for the installed module.
• 1 × trigger lanyard / tether – for mounting to the bike.
• 2 × KNOX Micro-Lock knee & shin impact protectors – CE EN
1621-1:2012, Level 2.
• 2 × KNOX Micro-Lock hip impact protectors – CE EN 1621-1:2012, Level 1.

Ready to ride with combined impact safety and abrasion resistance the moment you open the box. We recommend picking up extra CO₂ cartridges so you can reload after a deployment if the system and garment remain intact.